Did you know that you can use your mink strips more than 25 times if you keep good care of them? Or did you know you can return the royal shaggy curl of the minks after several times of application when you clean them in the right way? To answer the above questions, take a keen look at the following steps in which you can clean your minks for reuse like just the new ones from the shop.
The first step of making your 3D mink strips to be new again after use, by cleaning them begins after washing your hands clean. After you have washed your hands with a cleanser, paraben-free or even fragrance-free soap, use a Q-tip which is dabbed in a liquid, preferably water or even a makeup which is water base to remove the lash band. This will help in loosening the lash glue. The soaking can be for several seconds to make the process easier.
Having loosened the lash glue, it will be easier to peel off the mink strips. Hold the lash band corner and pill of gently the lash strip. You need to be keen not to pull it off by holding the mink hairs. Pulling off the hairs directly could lead to an accidental ripping off of the individual mink lash strands from the handmade lash band. Similarly, you need to peel it off gently to avoid any potential damages to your own eyelashes.
The third step of cleaning your 3D mink strips to become new again assists you in preserving your original look of the strips. After this step, your mink strips will be able to regain their natural appearance consisting of the shaggy curl that appears at the lash tips.
How do you achieve this then? Merely place the mink strip on to your index finger to ensure that the tips of the lash are entirely wrapped around the finger. With the wrapping, your lashes will maintain the curl with which they were bought. If you repeat this process for a while, your mink strips will regain their curl and beautiful look.
In the fourth step, you will use the tweezers for careful removal of large glue residues from both the front and back of the lash band. In this phase, you are going to utilize the power in your fingernails to scrape the smaller pieces of the remaining glue gently off the lash band. The scraping should be done lightly and downwards onto the index finger to avoid any damages. It aims at ensuring that the lash band is free of any glue remains that might hinder future mounting of the mink strips.
Of all the stages of renewing your 3D mink strips through cleaning, this fifth step requires your most attention. The stage here will need you to rinse the lash band carefully with a lot of clean water. However, when flushing the mink strip with water, you should take utmost care not to get any drops of water on the eyelash tips of the mink.
This will ensure that the curls which are made in the previous steps are appropriately preserved. Water interferes with the curls on the eyelash tips and should be kept at bay as possible. You can apply a wet Q-tip to prevent the water from flowing. It will ensure that no extra water flips to reach the shaggy mink lash tips while rinsing accidentally.
After the above five steps, the cleaning seems to be over, and you can now finalize the whole process here in step 6. In this step, you will only need to place the mink strip in the original 3D mink strips tray. It will help the strip to reshape and to be ideal for another round of wearing.
Always remember to keep the box safe and closed when you are using the mink strips. In this condition, the box will be free from any dust and bacteria. Remember that such materials may lead to complete damage of the strip, in both looks and usability.
If you are seeking the best 3D mink strips in the United States, don't hesitate, knock out virgin hair will always be your ideal aid. Contact them today for the best mink strips and know more about how to care for your lashes. The above steps could help you use your mink strips severally before purchasing new ones.